How to Calculate a Percentage Increase or Decrease
By Marcelo Torres · Published
Percentage changes appear everywhere: price rises, discounts, salary increases, growth figures. The formula is short, but two traps catch most people. Here are the formula, worked examples and the mistakes to avoid.
The formula
Percentage change = (new value − original value) ÷ original value × 100.
A positive result is an increase and a negative result is a decrease. Always divide by the original value, the one you're comparing against, not by the new one.
Worked examples
- A price goes from 80 to 92: (92 − 80) ÷ 80 × 100 = +15%.
- Monthly visits fall from 1,200 to 900: (900 − 1,200) ÷ 1,200 × 100 = −25%.
- A salary rises from 2,500 to 2,650: (2,650 − 2,500) ÷ 2,500 × 100 = +6%.
The Percentage Calculator does these calculations and shows the formula it used, so you can check each step.
Trap 1: changes aren't symmetrical
If a price rises 50% and then falls 50%, it doesn't return to where it started. From 100, a 50% rise gives 150, and a 50% fall from 150 gives 75.
The same happens in reverse: going from 50 to 75 is +50%, but going back from 75 to 50 is −33.33%. Each percentage is calculated on a different starting value.
Trap 2: undoing a percentage
Suppose a price is 100 after a 25% increase and you want the price before it. Taking 25% off 100 gives 75, which is wrong. The correct answer is 100 ÷ 1.25 = 80, because 80 + 25% of 80 = 100.
To remove an increase, divide by (1 + rate). To remove a discount, divide by (1 − rate): an item that costs 60 after a 20% discount originally cost 60 ÷ 0.8 = 75.
This is how you work out a price before tax: with a tax rate of 18%, a final price of 118 means a price before tax of 118 ÷ 1.18 = 100.
Percentage points vs percent
When the values are already percentages, say which change you mean. An interest rate going from 4% to 5% rises by one percentage point, but by 25 percent of its previous value.
The same applies to grades and averages: a weighted average that moves from 60% to 66% gained 6 points. In the Grade Calculator, each weight is a percentage of the final grade.
Quick checklist
- Divide by the original value, not the new one.
- Successive changes don't add up: +10% and then +10% is +21%, not +20%.
- To undo an increase or a discount, divide; don't subtract the same percentage.
- With rates and averages, say whether you mean percentage points or percent.